
The average position Search Console shows is the average of your highest spot on Google across every search where you appeared. Position 1 is the top of the page, so a lower number is better. It takes about ten minutes to learn to read, and it tells you whether Google is showing your pages higher or lower over time.
For a business owner, it’s a handy early warning, but it’s easy to misread. A single site-wide number can get worse even when your business is doing better. This guide explains what the figure means, how to read it step by step, what good numbers look like and the mistakes that cause needless panic.
What average position in Search Console tells you
Google’s help page on impressions, position and clicks gives the exact rule. For each search, Google records the highest spot any link to your site held. It then averages those spots across every search where you appeared. A position is only counted when your result got an impression, meaning it was shown on a page someone looked at.
Ads don’t take a position. An AI Overview takes a single position, and every link inside it gets that same number. That’s why a page can show position 1 and still earn few clicks.
Watching the average position Search Console reports for your key pages helps you spot slow slides early, often before enquiries fall. It also shows whether new pages are starting to climb. Read it as a trend over months, not a score for one day.
Take a Box Hill accounting firm. In September it ranks at position 3 for “tax accountant Box Hill” and position 6 for “small business accountant”. Its average is 4.5. In October a new blog post starts showing at position 40 for a hundred research searches. The firm’s main rankings haven’t moved, but its site-wide average jumps to a much worse number. Nothing went wrong. Google simply started showing the firm for more searches.
Not sure what your average position Search Console figure is telling you? Get a free consultation and we’ll read it with you.
How to read average position in Search Console
You’ll need access to your site’s Google Search Console property. If you haven’t set it up, start with our plain-English guide to Google Search Console.
1. Open the Performance report
In the left menu, click Performance > Search results. You’ll see four coloured boxes across the top: Total clicks, Total impressions, Average CTR and Average position. Google’s Performance report help page describes each one.
2. Turn on Average position
Click the Average position box so it’s filled in. A new line appears on the chart. Check the right-hand scale: position 1 sits at the top, so a rising line means better positions.
3. Pick a fair date range
Click Date above the chart. A pop-up opens with Filter and Compare tabs. Choose Compare, then Compare last 3 months year over year. Three months smooths out daily swings, and year on year removes seasonal changes like the quiet weeks after Christmas.
4. Look at queries, not the total
Scroll down to the table and open the Queries tab. Each row is a search with its own position. Sort by Impressions and focus on the ten searches that matter most to your business.
5. Filter to one page
Click + Add filter > Page, paste the address of a service page and click Apply. The chart and table now show only that page, which is far easier to judge than a whole-site figure.
6. Filter to Australia
Click + Add filter > Country and choose Australia. Overseas searches you don’t serve can drag your average down without affecting your enquiries.
7. Compare mobile and desktop
Open the Devices tab. If mobile positions are much worse than desktop, your mobile pages may need attention.
8. Export it for your monthly report
Click Export at the top right and choose Google Sheets. You’ll get a sheet with tabs for queries, pages, countries and devices. Save one each month so you can compare positions over the year.
What good looks like
There’s no single good number. Judge each important search on its own, and watch the trend over months. This table shows what each range usually means for a Melbourne business.
| Average position | What it means | What to do |
|---|---|---|
| 1 to 3 | Top of page one | Protect the page, check clicks are coming in |
| 4 to 10 | Page one, lower down | Improve the page and its title to climb |
| 11 to 20 | Page two, close | Your best quick wins, strengthen content and links |
| 21 and beyond | Rarely seen | Check the page matches what searchers want |
| Position good, clicks low | AI Overview or ads above you | Improve your title and description |
Positions 11 to 20 deserve the most attention. Google already sees these pages as relevant, so better content, clearer headings and a few internal links from related pages can lift them onto page one. Changes usually take weeks to show, so give each improvement time before you judge it.
Statistics: an AI Overview was linked to a 58% lower average click-through rate for the top-ranking page across 300,000 keywords. Source: Ahrefs, February 2026. Google users clicked a link inside an AI summary in just 1% of visits. Source: Pew Research Center, July 2025.
Want to see what better positions turned into for other Melbourne businesses? See our results.
Common mistakes
Reading only the site-wide number. As the Box Hill example shows, the overall average mixes every search. Fix: filter to your main pages and your most important searches.
Thinking higher is better. Position 2 beats position 12. Fix: remember 1 is the top, and check which way the chart’s scale runs.
Expecting it to match your own Google search. Your results change with location, device and search history. A Footscray mechanic searching from the workshop sees different results from a customer in Werribee. Fix: trust the report’s averages over spot checks. If you want a second view, a private browser window gives a cleaner result, but it still won’t match every customer’s screen.
Ignoring clicks. A good position with no clicks doesn’t help your business. Fix: read position alongside clicks and impressions. Our guide to Search Console clicks vs impressions explains how they fit together.
Reacting to daily swings. Positions move a little every day as Google tests results. Fix: judge changes over at least four weeks, and only worry about a steady slide on searches that bring in customers.
Looking for it in GA4. GA4 tracks what visitors do on your site, not where you rank. Fix: use Search Console for positions and GA4 for enquiries.
What to do next
The average position Search Console shows is most useful when you read it for one page and one search at a time. Check your main pages and most important searches once a month, using the same three-month, year-on-year view. If clicks fell while positions held, read our guide on why organic clicks fall while impressions rise. Clear monthly SEO reporting and SEO tracking are part of our SEO Reporting and Analytics service, and you can see how we work on our process page.
Want a monthly report that shows which positions actually bring in enquiries? Get your free consultation. No lock-in contracts.
Average position Search Console FAQs
Is a lower average position better?
Yes. Position 1 is the top of Google’s results, so a lower number means you appear higher. A move from 8 to 4 is an improvement.
Why did my average position drop when clicks went up?
Google probably started showing your site for more searches, many at low positions. Those new searches pull the average down while your main rankings stay put. Filter by query to check.
How is average position calculated?
Google takes your highest position for each search where your site got an impression, then averages those positions. Searches where nobody saw your result aren’t counted.
What is a good average position?
For searches that bring in customers, anywhere on page one, positions 1 to 10, is a solid result. Judge each search separately rather than chasing one site-wide number. More answers are on our FAQ and blog.
Want results like these for your business?
Book a free, no-obligation consultation with a Melbourne SEO expert.
Get a Free Consultation